Drivers Somagic Sound Cards & Media Devices

admin



-->

Drivers Somagic Sound Cards & Media Devices Free

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Drivers

Original product version: Windows 10, version 1703
Original KB number: 4021854

Drivers Somagic Sound Cards & Media Devices Download

Download AMD sound card drivers or install DriverPack Solution software for driver scan and update. Download Download DriverPack Online. C-Media AC97 Audio Device. ATI Function Driver for High Definition Audio - ATI AA11. ATI Function Driver for High Definition Audio - ATI AA09. All AMD sound cards. Identifying the device. Check the device ID with this command lsusband the output should look like this. Bus 001 Device 008: ID 1c88:0007 Somagic, Inc. SMI Grabber (EasyCAP DC60+ clone) (no firmware) SMI-2021CBE Prepare for installing the driver. If you get this same output with lsusb then follow on with these link's. Somagic HOwTO linux. Your sound card is listed under one (usually the last) of the sound tabs at the top of the window. Other methods for determining the sound card type Looking at the sound card. Another method of determining the sound card manufacturer or model is by opening your computer case and physically examining the sound card.

Symptom

When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.

Cause

This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.

Resolution

To fix this issue, use one of the following methods.

Method 1

Drivers Somagic Sound Cards & Media Devices Software

To resolve this issue, install update 4022716.

Method 2

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

Drivers somagic sound cards & media devices download

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Note

See the device manufacturer's user guide for specific instructions about how to install the driver.

Drivers Somagic Sound Cards & Media Devices -

Method 4

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

When it restarts, Windows will try to reinstall the device by using the device-specific driver.